Sound Sign CR201/4 Master Unit - SHHH! Quiet Zone
SoundSign Noise Warning Sign - Master Unit
A simple solution for warning of high noise levels
A SoundSign Master Unit contains the noise measurement part of the system along with a microphone and the connections for the optional USB Data Logger.
Available in one of four different versions, the SoundSign Master Unit can be installed quickly to provide clear information about high noise levels. Simply configure the unit and mount it in the location needed.
Enhance your SoundSign with a range of options and accessories
As well as the CR:203 Data Logger and the CR:202 Remote Display Units, we can provide a range of accessories and options to enhance and expand your SoundSign.
If you need to place the microphone away from the SoundSign, we can supply a range of microphone extension cables, preamplifiers and microphone capsules to allow you to put the measurement microphone up to 50m from the SoundSign.
We can also provide acoustic calibrator, a simple CR:306 sound level meter to help you set the trigger level, as well as outdoor microphones if your noise source is outdoors.
Click here for information about accessories and options available for the SoundSign.
What's in the box?
The SoundSign is delivered as a complete package. Each SoundSign Master Unit contains:
1 x SoundSign Noise Warning Sign
1 x Microphone Unit to connect to the SoundSign
1 x Mains Power Supply with UK, EU & US Plugs
1 x 5m Power Extension Cable
2 x Wall Mounting Plugs & Screws
1 x Installation Guide
Installation & Configuration
Click here for installation and setup information for the SoundSign
|Application||Noise activated warning sign|
|Trigger Level||40dB(A) to 114 dB(A) in 1dB Steps|
|Frequency Weighting||‘A' Weighting to IEC 61672-1:2002|
|Time Weighting||Slow to IEC 61672-1:2002|
|Visual Indication||High intensity white LED with four standard designs|
| ||User selectable brightness levels|
|Display delay time||None or 30 seconds|
|External Power||2.1mm Power Jack, 12v DC via CU:200 Mains Power Supply|
| ||Output Control for Remote Display Units via standard 2.1mm Power Connector|
| ||Up to three Remote Display Units can be powered from a Master Unit|
|Dimensions||300mm diameter, 50mm depth|
|Mounting||2 x Keyhole mounting slots|